<html>
  <head>

    <meta http-equiv="content-type" content="text/html; charset=utf-8">
  </head>
  <body text="#000000" bgcolor="#FFFFFF">
    <p>Dear tech and committee,</p>
    <p>Here is a quick parts list which I propose to buy to replace
      Porcupine (or to replace Cobra/Catfish and swap some bits around
      to eventually end up with a suitable replacement). This is a
      fairly high end system using the latest 8th gen Intel CPUs and a
      reasonable quality motherboard.<br>
    </p>
    <ul>
      <li>Intel i7-8700T - $300 (<a moz-do-not-send="true"
href="https://www.ebay.com.au/itm/Intel-Core-i7-8700T-Processor-12M-Cache-up-to-4-00-GHz/223089946483">https://www.ebay.com.au/itm/Intel-Core-i7-8700T-Processor-12M-Cache-up-to-4-00-GHz/223089946483</a>)</li>
      <li>ASRock B360M LGA1151-CL mATX motherboard - $110 (<a
          moz-do-not-send="true"
href="https://www.ple.com.au/Products/631588/ASRock-B360M-HDV-LGA1151-CL-mATX-Desktop-Motherboard">https://www.ple.com.au/Products/631588/ASRock-B360M-HDV-LGA1151-CL-mATX-Desktop-Motherboard</a>)</li>
      <ul>
        <li>Note: cheaper motherboards use Realtek LAN<br>
        </li>
      </ul>
      <li>8GB DDR4-2666 RAM - $120 (<a moz-do-not-send="true"
href="https://www.ple.com.au/Products/632330/GeIL-8GB-Single-DDR4-Pristine-C19-2666MHz">https://www.ple.com.au/Products/632330/GeIL-8GB-Single-DDR4-Pristine-C19-2666MHz</a>)</li>
      <ul>
        <li>if 8GB RAM is not enough, 16GB DDR4-2666 modules can be
          found for $220 (<a moz-do-not-send="true"
href="https://www.ple.com.au/Products/628441/GeIL-16GB-Kit-2x8GB-DDR4-EVO-X-RGB-LED-C16-2400MHz">https://www.ple.com.au/Products/628441/GeIL-16GB-Kit-2x8GB-DDR4-EVO-X-RGB-LED-C16-2400MHz</a>)
          however this has the potential to go over-budget<br>
        </li>
      </ul>
      <li>500GB SSD - $170 (<a moz-do-not-send="true"
href="https://www.ple.com.au/Products/630702/Crucial-MX500-500GB-SATA-25-7mm-SSD">https://www.ple.com.au/Products/630702/Crucial-MX500-500GB-SATA-25-7mm-SSD</a>)</li>
      <li>Power supply - use existing<br>
      </li>
      <li>Graphics card - use existing</li>
      <li>Case - use existing</li>
    </ul>
    <p>Total cost for this build should be around $700, within the
      budget as proposed in the minutes <a moz-do-not-send="true"
        href="https://www.ucc.asn.au/infobase/minutes/2018/2018-07-31.ucc">here</a>.</p>
    <p>Please provide feedback on any cost-saving measures, missing
      components, if this is under or over specced etc.<br>
    </p>
    <p>- [FVP]<br>
    </p>
  </body>
</html>