[tech] Announcing UCC-IoT, was Re: Extra devices network for IoT
James Arcus
jimbo at ucc.asn.au
Tue Dec 3 01:37:51 AWST 2019
Hi all,
I'd talked about doing it in person a few times, but tonight I finally
got around to creating the start of our "IoT network".
So far, this has involved trunking a new VLAN 7, provisioning a new
subnet 192.168.22.0/24 with DHCP, and creating a pair of WPA2-PSK WLANs
(UCC-IoT and UCC-IoT-5), broadcast from both the clubroom AP (smallwing)
and the UWAnime AP (abe). At the moment, the VLAN is trunked to all the
switches, the APs and Murasoi, nowhere else.
At current, you can join the wifi network with the key and get both an
IPv4 and a v6 address, but it doesn't route anywhere. The intention will
be to keep access in and out fairly limited to what's needed. Wired
ports can also be added to access VLAN 7 in their relevant switch configs.
At the moment, DHCP is given freely out to anyone who joins. It's not
final, merely what was easiest to set up and use for testing the new
network. I'm imagining the next steps will be to finalise a DHCP and
firewalling policy, and migrating the webcams across?
As usual, the wifi passphrase in in uccpass, under UCC/other/IoT-wifi.
Cheers,
Jimbo [MPT]
More information about the tech
mailing list