<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2769" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Has anyone sucessfully upgrade a Wizard from a
1.x version bios to 2.5 version? I have sucessfully upgraded from 1.2 and
1.3 to 1.4 but when I tried to upgrade from 1.4 to 2.5 the bios flash appeared
to work correctly but the machine would not work after attempting to report. THe
machine just appears dead, no post - just dead. I confirmed the issue is the
bios by putting the v1.4 bios chip from another wizard into the
machine.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Does anyone have a working link to bios recovery
for the Wizard? - the links in this archive are no longer working.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Anyone been able to boot the wizard via
USB?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Anyone been able to get a USB2.0 memory
stick to work on a wizard?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I attempted to do some RAM upgrades. When I
installed a working 128MB PC133 SODIMM into my pair of wizards, both would only
recongnize 64MB. I tried a 256MB SODIMM and both machines would recognize up to
128MB? Any ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Regards, Andrew</FONT></DIV></BODY></HTML>